bosparelmoervlinder - primair

Laser scanning data provide insight into butterfly microhabitats

Dutch Butterfly Conservation, University of Amsterdam
09-APR-2021 - Airborne laser scanning creates high-resolution 3D images of the landscape. Researchers from the University of Amsterdam and the Dutch Butterfly Conservation used these data to study the habitat preferences of butterflies. They found that the structure of the vegetation determines the occurrence of butterflies. Even the habitats of small invertebrates can be studied in this way.
Share this page

Grayling (Hipparchia semele)Light Detection And Ranging (LiDAR) is a remote sensing technique that can produce highly detailed 3D data of the landscape. These data are collected by an airplane flying over the landscape with a laser scanner. The distance and position of all the points where the laser reflects from the landscape are measured and used to produce a point cloud of the landscape: a three-dimensional image of the terrain, human constructions and the vegetation structure. The Dutch waterboards use this technique to produce the national elevation model of the Netherlands (the AHN). For this purpose, reflections of the vegetation structure are irrelevant, but for ecologists they provide the opportunity to investigate the structure of the vegetation in high resolution and across the whole of the Netherlands.

LiDAR data are collected by laser scanning from an airplane. The laser reflectance points produce a three-dimensional image landscape. The vegetation structure can be mapped from these data

White admiral (Limenitis camilla)Researchers from the University of Amsterdam (UvA) and the Dutch Butterfly Conservation have used LiDAR data to identify the fine-scale habitat preferences of butterflies. They did this for four threatened species: Small pearl-bordered fritillary, Grayling, White admiral and Heath fritillary. These species occur in contrasting habitats: moist grasslands, dry open habitats, moist forests and dry forests with clearings. This selection allowed a comparison of the applicability of LiDAR data across different habitats. Using data from the Dutch butterfly monitoring scheme, locations were compared where a species was present with locations where it was absent. The Dutch national LiDAR dataset AHN3 (commonly available via was used to classify the vegetation structure at each sampling point.

Model results for the Small pearl-bordered fritillary (Boloria selene), the Grayling (Hipparchia semele), the White admiral (Limenitis camilla) and the Heath fritillary (Melitaea athalia). The bars show the relative importance of vegetation structure characteristics referring to the low vegetation (green), mid-to-high vegetation (orange) and landscape-scale structures (purple). Standard errors are indicated in black

Small pearl-bordered fritillary (Boloria selene)The vertical and horizontal structure of the vegetation were important determinants of the occurrence of these four butterfly species. Landscape-scale structures and the mean height of the vegetation where the most important characteristics for both open habitat species (the Small pearl-bordered fritillary and the Grayling), while the density of mid-to-high vegetation and the number of open patches were most important for both woodland species (the White admiral and the Heath fritillary). The models also provided new ecological insights; for instance, the presence of high trees (higher then twenty metres) appears to be important for the White admiral. Wooded habitats could be classified better than open habitats, because low and seasonal vegetations such as grasses and herbs are less well captured in the LiDAR data than higher permanent vegetation.

Heath fritillary (Melitaea athalia)With the use of LiDAR data we can now explore which vegetation structures are important for specific species, which can be used to map suitable areas or to improve nature management at existing habitats. This can also be done for many other invertebrate species as long as detailed distribution data are available. The potential of LiDAR data will increase further in the future when more detailed and more frequent LiDAR data become available. For example, the current data are collected in winter when a better reflectance of the surface can be obtained due to the absence of leaves, but additional data collection during summer could greatly improve the classification of especially grassland vegetations. LiDAR data thus offer a great potential to study the fine-scale habitat preferences of invertebrates.

More information

Tekst: Reinier de Vries, University of Amsterdam; Michiel Wallis de Vries, Dutch Butterfly Conservation; Szófia Koma; Daniel Kissling
Photos: Kars Veling (lead photo: Heath fritillary)
Illustrations: Bakx and others, 2019; De Vries and others, 2021

This website uses cookies. Would you like more information about cookies?
Read our statement. Don't show this again